Réduction du délai de livraison

• Montage express en un jour ouvrable - si tous les composants nécessaires sont disponibles (affiché en fonction de la configuration), le montage se fait en un jour ouvrable.
  en fonction de la configuration individuelle), le montage a lieu les jours ouvrables entre
  de 8h00 ŕ 14h00. L'expédition a alors lieu le plus rapidement possible. Cette option est nécessaire
  condition préalable ŕ l'envoi express.
• sans montage express - le montage et l'expédition ont lieu dans un délai de 3 ŕ 4 jours ouvrables

Modčle d'arbre

Position de montage

L'indication de la position de montage est nécessaire pour déterminer la quantité de lubrifiant.
Vous trouverez les désignations des différentes positions de montage dans l'illustration suivante.

Terminal box position

The position of the terminal box (0,90,180 and 270) and the positioning of the cable gland (A, B, C
and D) can be configured as follows:

Fuv variant

There is a choice of different dimensions (see data sheet). This allows
and hole pattern of the mounting holes can be adapted to the 1:1 exchange of various competitor makes.
competitors.

Motor protection and brake

The attached three-phase motor can be configured here

The following options are available for monitoring the winding temperature of the motor:

a) with 1 set (3 pcs.) of PTC thermistors - for monitoring with PTC thermistor tripping device or frequency inverter

b) with 1 set (3 pcs.) of microthermal switches (NC contact) - for monitoring e.g. with motor protection relay

The selection of one of these options is recommended when operating the geared motor on the frequency inverter,
as reduced speeds and the associated lower cooling capacity can cause the motor to overheat.
motor may overheat.

External fan

a) without - standard
b) with forced cooling fan (available from motor power 0.12kW)

Use of a forced cooling fan - e.g. when operating on a frequency inverter - to prevent the motor from overheating
due to the lower cooling capacity at reduced speeds.
Forced cooling fan voltage: 230V/50Hz/1~
Protection class: IP55

Combination of motor with brake and remote fan on request

Lubricant

a ) Synthetic high-performance gear oil with the specification CLP PG VG320For use under severe conditions and long maintenance intervals

b) Synthetic food grade high performance gear oil with the specification CLP PG VG320 NSF H-1. For use under severe conditions and long maintenance intervals. Certified to NSF H-1 and therefore approved for use in the food industry (occasional food contact)

c) Without oil - for filling by the customer. Further recommended oil types and filling quantities can be found in the operating and maintenance instructions.