Electric drive technology
buy easily and quickly
You are here

Three-phase motor with frequency converter

Three-phase motor with frequency converter

Manufacturer/Type: ecoDrives FCA 80 B-6 / IE2-INVEOR-IV01-DK02
Item no: 30941

Selected configuration

Reconfigure
753,00 EUR
896,07 EUR incl. VAT plus Shipping costs

Technical data

Mains voltage400V/50Hz/3ph 
Rated current1,51 A
Efficiency at 100% nominal load73,1 %
Efficiency classIE2 (High Efficiency) 
Power0,55 kW
Rated speed at 50Hz885 rpm
Maximum speed3600 rpm
Protection class motor/FUIP55/IP65 
Insulation classF 
Operating modeS1 (continuous operation) 
IEC size80 
DesignB14G 
Terminal box positiontop 
Flange sizeC160 
Shaft end (dxL)19x40 mm 
Bearing d sideNon-locating bearing/6204-2Z-C3/lubricated for life 
Bearing n-sideNon-locating bearing/6204-2Z-C3/lubricated for life 
ColorRAL7030 
housingAluminium 
Weight 11,30 Kg  

Description

Product description
Three-phase asynchronous motor with motor-mounted powerful frequency inverter in a robust and compact die-cast housing with high temperature and vibration resistance. Suitable for a wide range of variable-speed drive tasks in industrial environments.

Quick and inexpensive installation
The decentralized drive controller concept minimizes wiring and installation effort and therefore also project planning and installation costs for extensive systems.

Simple operation
The compact drive can also be operated on site using the integrated membrane keypad. This makes it possible to change the direction of rotation, switch parameters or setpoints, as well as start and stop commands.

High reliability - even in harsh environmental conditions
The IEC standard motor is low-maintenance and the frequency inverter, with its robust and fanless die-cast housing, is highly resistant to temperature and vibration. The entire drive is protected against dust and splash water.


Technical data frequency inverter
  • Sensorless vector control
  • Output frequency 0-400Hz
  • Permissible overcurrent: 150% for 60s
  • 4 digital inputs 2 analog inputs (0-10V, 0-20mA)
  • 2 digital outputs 2 relay outputs (5A at 230V and resistive load)
  • 7 fixed frequencies
  • PID controller
  • Integrated soft PLC
  • Membrane keypad with the following functions:
  • Start/Stop
  • Change of direction of rotation
  • Recall of 2 fixed frequencies / speeds
  • Stepless speed control with potentiometer
  • 3 status LEDs
Scope of delivery
  • Drive unit mounted and wired ready for connection with membrane keypad and potentiometer for operation.
  • EMC mains filter category C2 integrated
  • Motor with 1 set (3 pcs.) of PTC thermistors for temperature monitoring via FI
  • Cable glands for mains and control cable
  • Operating and maintenance instructions under "Documentation"
  • Free INVEORpc PC software (download under "Documentation")
  • Important note: To parameterize the FI, an MMI manual control unit or an FI/USB interface cable is required to use the INVEORpc PC software (see "Configurator")

Data blisters and drawings (German only)
Data and dimension sheet
Download
CAD-DATEI_STEP_30941.zip
Download
Dokumentation
INVEOR frequency inverter operating instructions
(5 MB)
Download
Operating and maintenance instructions
(1 MB)
Download
Software downloads
PC programming software INVEORpc
(32 MB)
Only possible after registration.

Product configurator

This product can be configured. The selected options are displayed in the order information and the product price and delivery time are updated automatically.

Notes on option selection (German only) (other options available on request)

Selected configuration

Suitable accessories for the ecoDrives FCA 80 B-6 / IE2-INVEOR-IV01-DK02

Your choice:
ecoDrives FCA 80 B-6 / IE2-INVEOR-IV01-DK02
Digital control unit
Item no:26407
More information
€ 214,00
(254,66 EUR incl. VAT)
Digital control unit
Item no:26409
More information
€ 214,00
(254,66 EUR incl. VAT)