Voltage

230/400V/D/Y, 50Hz - standard up to 2.2kW

400/690V/D/Y, 50Hz - standard from 3.0kW

Protection class

IP code for the degree of protection in accordance with DIN EN 60529, 60034-5,
First code number: Protection against ingress of foreign bodies
Second code number: Protection against ingress of water with harmful effects

IP55 - dust-protected, protection against water jets (standard protection type)

Terminal box position

Selectable options: top (standard)

The terminal box position is defined by looking at the output shaft side of the motor.

Example "Terminal box right"

Motor protection

The following options are available for monitoring the winding temperature of the motor:

1 set of PTC thermistors (3 pcs.) - for monitoring with PTC thermistor tripping device or frequency inverter
(standard from > 0.75kW)

The selection of these options is recommended when operating the motor on the frequency inverter, as reduced speeds and the associated lower cooling capacity can cause the motor to overheat.

Colour system

Selectable options:

"moderate" - standard

Standard colour - suitable for climate group "moderate" according to IEC 60721-2-1
Indoor and humid installation, short-term up to 100% relative humidity at temperatures up to +30°C, continuous up to 85% relative humidity up to 25°C

Colour structure Size 56 - 112
Plastic base coat, layer thickness > 30ľm
Top coat of water-based paint, layer thickness 30-60ľm

Colour structure size 132 - 355
Water-thinnable primer containing zinc phosphate, layer thickness > 30ľm
Top coat 2-component epoxy resin-based water-based paint, layer thickness > 40ľm

Colour shade

Standard colour RAL 7016 anthracite grey silk matt